View active topics
(LMSC members can login to see more options)
Weather data and cameras - update
5 posts
• Page 1 of 1
Weather data and cameras - update
Today the Holfuys stopped being visible on our website - all three of them. I have contacted the manufacturer to investigate.
The Long Mynd North and South cameras are all now in their permanent location, so hope that looks good for everyone. The website layout will be changed in due course, it's currently here but is already also linked from the top of the main weather page.
http://www.longmynd.org/?page_id=2938
The Long Mynd North and South cameras are all now in their permanent location, so hope that looks good for everyone. The website layout will be changed in due course, it's currently here but is already also linked from the top of the main weather page.
http://www.longmynd.org/?page_id=2938
- Dave Thomas
- Posts: 1928
- Joined: Thu May 02, 2013 12:45 pm
Re: Weather data and cameras - update
Holfuy had a technical problem their end which they have fixed, so all is good now.
- Dave Thomas
- Posts: 1928
- Joined: Thu May 02, 2013 12:45 pm
Re: Weather data and cameras - update
Dave,
I would just like to say how much your efforts for the club are truly appreciated by me (and no doubt many others). Your contributions regarding safety / weather prediction / hardware over the years have been outstanding. Top bloke!
I would just like to say how much your efforts for the club are truly appreciated by me (and no doubt many others). Your contributions regarding safety / weather prediction / hardware over the years have been outstanding. Top bloke!
- David Broughton
- Posts: 255
- Joined: Sun May 05, 2013 6:00 pm
Re: Weather data and cameras - update
they do the job nicely, cracking view north and south! Thanks to all involved!
- Crawford Coulson
- Posts: 147
- Joined: Thu May 02, 2013 12:45 pm
Re: Weather data and cameras - update
Brilliant Dave well done. Couldn't agree more with Dave Broughton. Thanks for your efforts.
- Howard Holt
- Posts: 22
- Joined: Sun May 05, 2013 6:00 pm
5 posts
• Page 1 of 1